[:en]LOTO (Lockout Tagout) Training [:id]Training LOTO (Lockout Tagout)[:]

[:en]loto

Introduction

LOTO (Lockout Tagout) Training oleh Global Compliance Asia – a procedure to ensure the machinery / dangerous equipment has been turned off appropriately and will not turn on until the work has been completed, it is the function of the system LOTO (Lockout tagout.

Technically, LOTO used by physically locking the power source of circuit and equipment after shut down. Power source was then labeled with a readable label which alert others in the area that locks have been installed. In addition to protect workers from electrical hazard, lock-out and tag-out prevent contact with the equipment that operates: blades, gears, axes, etc., Lock-out / tag-out also prevent the escape of gas, liquid or hazardous materials unexpectedly in work area.

Training Benefits

  • Able to demonstrate their comprehension about background and concept of LOTO
  • Able to recognize the purpose of policies regarding LOTO application and its benefits in work
  • Able to determine which employees should apply LOTO
  • Able to identify hazard and types of LOTO equipment
  • Understand the stages to be followed in implementing LOTO and what to do at each stage
  • Have an awareness that is realized in responsible behavior in conducting LOTO

Training Materials

  1. Introduction
  • Pre test
  • Background
  • Basic regulation and legislation
  • LOTO Benefits

2. LOTO Concept

  • LOTO Definition
  • Types and Resources
  • Type of equipment and Energy Isolation Equipment
  • General Instruction of LOTO Execution
  • Special Instructions of Machinery and Equipment Testing
  • Methods of LOTO Group
  • Evaluation / Audit of LOTO Implementation

3. Summary and Guidan LOTO Practice Guideline

4. Case study, exercise

5. Resume, discussion, Post Test

 

Training Methods

Interactive, presentation, discussion, case study

Criteria for Participants

All of HSE Department staff, all of HRD staff, representative plant of the company, all employees and all the people who have potential danger in their activity / work either low or high risk

Training duration:

2 days / 14 hours ( 9:00 a.m. to 4:00 p.m. )

Training investment

4,000,000.00 IDR /participant (exclude: accommodation and lodging )

Training Facilities:

  • Experienced Trainer
  • Jacket
  • Certificate
  • Module & Training Kit
  • Lunch
  • Coffee Break
  • Comfortable training rooms (held in hotel)

 Info & Contact Person :

Mobile:

+62 877 0999 5125 (Arum)

Email:

training@global-compliance.asia

arum.gc@gmail.com

Training Schedule :

  • Jakarta, 17 – 18 November 2015
  • Australia, 19 – 20 November 2015
  • Vietnam, 26 – 27 November 2015
  • Jakarta, 15 – 16 December 2015
  • Vietnam, 23 – 24 December 2015
  • Australia, 30 – 31 December 2015

[:id]loto

Pengantar 

Training LOTO (Lockout Tagout) oleh Globa Compliance Asia  – suatu prosedur untuk menjamin mesin/alat berbahaya secara tepat telah dimatikan dan tidak akan kembali menyala selama pekerjaan berbahaya atapun pekerjaan perbaikan / perawatan sedang berjalan sampai dengan pekerjaan tersebut telah usai, itu adalah fungsi LOTO sistem (Lockout Tagout)

Secara teknis, LOTO digunakan dengan mengunci secara fisik pada sumber tenaga dari circuit dan peralatan setelah dimatikan. Sumber tenaga itu lalu diberi label dengan label yang mudah dibaca yang mengingatkan orang lain pada areal tersebut bahwa kunci telah dipasang. Disamping untuk memprotec pekerja dari bahaya listrik lock-out dan tag-out mencegah kontak dengan bagian peralatan yang beroperasi: sudu-sudu, roda gigi, sumbu, dsb., lock-out/tag-out juga mencegah keluarnya gas, cairan atau bahan berbahaya secara tidak terduga pada tempat kerja.

Tujuan Training 

  • Mampu mendemonstrasikan pemahamam mereka tentang latar belakang dan konsep LOTO
  • Mamapu mengenali tujuan dikeluarkannya kebijakan mengenai aplikasi LOTO serta manfaatnya dalam pekerjaan
  • Mampu menentukan karyawan yang mana yang harus mengaplikasikan LOTO
  • Mampu mengidentifikasi bahaya dan jenis- jenis peralatan LOTO
  • Memahami tahapan yang harus dilalui dalam melaksanakan LOTO dan apa yang harus dilakukan pada masing-masing tahapan.
  • Memiliki kesadaran yang diwujudkan dalam bentuk perilaku yang bertanggung jawab dalam melaksanakan LOTO

Materi Training 

  1. Pendahuluan
  • Pre test
  • Latar Belakang
  • Dasar peraturan dan perundangan
  • Manfaat LOTO

2. Konsep Penggembokan dan Pelabelan (LOTO):

  • Pengertian LOTO
  • Jenis/Bentuk dan Sumber Energi
  • Jenis Peralatan dan Alat Pengisolasian Energi
  • Petunjuk Umum Pelaksanaan LOTO
  • Petunjuk Khusus Pengetesan Permesinan dan Peralatan
  • Metode LOTO Group
  • Evaluasi/ Audit Pelaksanaan LOTO

3. Rangkuman dan Pedoman Praktek LOTO

4. Studi Kasus, Latihan

5. Resume, Diskusi,Post Test

Metode Training

Metode interaktif, presentasi, diskusi, studi kasus

Peserta yang direkomendasikan

Seluruh staff dan Jajaran HSE Departemen, seluruh staff dan Jajaran HRD, perwakilan plant perusahaan, maupun seluruh karyawan dan semua pihak yang dalam aktifitas kerjanya mempunyai potensi timbulnya bahaya baik yang rendah ataupun bersiko tinggi

Durasi Training

2 hari (/efektif 14 jam (09.00 s/d 16.00)

Investasi Training

Rp. 4.000.000,00/peserta

Fasilitas Training

  • Trainer Berpengalaman
  • Jaket
  • Sertifikat
  • Modul
  • Training Kit
  • Lunch
  • Coffee Break
  • Ruang training yang nyaman (diselenggarakan di hotel berbintang)

Info & Contact Person :

Mobile:

+62 877 0999 5125 (Arum)

Email:

training@global-compliance.asia

arum.gc@gmail.com

Jadwal Training :

  • Jakarta, 17 – 18 November 2015
  • Australia, 19 – 20 November 2015
  • Vietnam, 26 – 27 November 2015
  • Jakarta, 15 – 16 Desember 2015
  • Vietnam, 23 – 24 Desember 2015
  • Australia, 30 – 31 Desember 2015

[:]

Leave a Reply