[:en]Introduction
Measurement Uncertainty Estimation Training by Global Compliance Asia – Increased area of human resources associated with the calculation of testing uncertainty estimation. Where measurements of each element in analysis test must be correct to improve quality of product because of the high competitiveness. Therefore, ISO 17025 implementation is a key demand to improve the competence of testing or calibration laboratory. Among the important points in ISO 17025 is the uncertainty in measurement. So that’s why this training is important to be followed by testing or calibration laboratory.
Training Objectives
- Understand of measurement uncertainty estimation principle for laboratory
- Able to do measurement uncertainty estimation for laboratory
- Understand how to solve the problem in measurement uncertainty estimation
Training Materials
- Review of SO/IEC 17025 requirement clause 5.4.6
- Types of measurement error in testing
- Weakness of Test Method
- Condition and environment accommodation
- Terms and definitions in the measurement
- Sources of uncertainty
- Classification of uncertainty components
- Degree of testing rigor & Testing Model
- Identify sources of uncertainty
- Uncertainty Evaluation of Type A, B and Combination
- Simulation practice of uncertainty measurement in testing: Gravimetry, titrimetry, spectrophotometry and Direct Reading
- Discussion and Q & A
Training duration:
2 days / 14 hours ( 9:00 a.m. to 4:00 p.m. )
Training investment
4,000,000.00 IDR /participant (exclude: accommodation and lodging )
Training Facilities:
- Experienced Trainer
- Jacket
- Certificate
- Module & Training Kit
- Lunch
- Coffee Break
- Comfortable training rooms (held in hotel)
Info & Contact Person :
Mobile:
+62 877 0999 5125 (Arum)
Email:
training@global-compliance.asia
arum.gc@gmail.com
Training Schedule:
- Jakarta, 17 – 18 November 2015
- Vietnam, 19 – 20 November 2015
- Australia, 25 – 26 November 2015
- Vietnam, 02 – 03 December 2015
- Australia, 17 – 18 December 2015
- Jakarta, 28 – 29 December 2015
[:id]Pengantar Training
Training Estimasi Ketidakpastian Pengukuran oleh Global Compilance Asia – Peningkatan ruang sumber daya manusia terkait dengan perhitungan estimasi ketidakpastian pengujian. Dimana pengukuran dalam tiap unsur dalam uji analisa sangat dituntut kebenaranya untuk meningkatkan mutu produk karena tingginya daya saing. Oleh karena itu penerapan ISO 17025 merupakan tuntutan utama untuk meningkatkan kompetensi laboratorium Uji atau kalibrasi. Diantara point penting dalam ISO 17025 adalah ketidakpastian dalam pengukuran. Atas dasar inilah kenapaTraining Estimasi Ketidakpastian Dalam Pengujian ini penting diikuti oleh setiap laboratorium Uji ataupun Kalibrasi.
Tujuan Training
- Mengerti prinsip perhitungan ketidakpastian pengukuran untuk laboratorium
- Mampu dan bisa melakukan perhitungan ketidakpastian pengukuran untuk laboratorium
- Mengerti bagaimana menyelesaikan masalah dalam perhitungan ketidakpastian pengukuran
Materi Training
- Review Persyaratan ISO/IEC 17025 Klausul 5.4.6
- Jenis-jenis kesalahan pengukuran dalam pengujian
- Kelemahan Metode Uji
- Kondisi dan akomodasi lingkungan
- Istilah dan definisi dalam pengukuran
- Sumber-sumber ketidakpastian
- Klasifikasi komponen ketidakpastian
- Derajat ketelitian pengujian & Model Pengujian
- Indentifikasi sumber ketidakpastian
- Evaluasi Ketidakpastian Tipe A , B dan Gabungan
- Praktek simulasi perhitungan ketidakpastian pada pengujian: Gravimetri, Titrimetri, Spektrofotometri dan Direct Reading
- Diskusi dan tanya jawab
Durasi Training
2 hari /efektif 14 jam (09.00 – 16.00)
Investasi Training
Rp. 4.000.000,00/peserta
Fasilitas Training
- Trainer Berpengalaman
- Jaket
- Sertifikat
- Modul
- Training Kit
- Lunch
- Coffee Break
- Ruang training yang nyaman (diselenggarakan di hotel berbintang)
Info & Contact Person :
Mobile:
+62 877 0999 5125 (Arum)
Email:
training@global-compliance.asia
arum.gc@gmail.com
Jadwal Training :
- Jakarta, 17 – 18 November 2015
- Vietnam, 19 – 20 November 2015
- Australia, 25 – 26 November 2015
- Vietnam, 02 – 03 Desember 2015
- Australia, 17 – 18 Desember 2015
- Jakarta, 28 – 29 Desember 2015
[:]